Industry news

The sewage lifting pump drives the impeller to rotate by an electric motor to generate negative pressure to suck in sewage, and uses centrifugal force to discharge the sewage outside the pump body to achieve the process of lifting and conveying sewage. Its working principle is simple and effective, providing important support for the normal operation of urban drainage systems.

There are many types of sewage pumps, each with its own unique characteristics and scope of application. When choosing a sewage pump, you need to decide the most suitable type according to the specific use environment and needs.

The pipeline design of stainless steel submersible pumps needs to take into account a variety of factors. Through scientific and reasonable design and construction, the safe and reliable operation of the submersible pump pipeline can be ensured.

The water leakage of submersible pumps is a complex problem that needs to be analyzed and solved from multiple aspects. Through regular inspection and maintenance, enhanced lubrication, standardized installation and operation, and selection of suitable materials and pump types, the occurrence of leakage can be effectively reduced and avoided.

Through the correct steps, the problem of bearing damage of stainless steel submersible pump can be effectively solved and its normal operation can be ensured. If you cannot solve it yourself, it is recommended to contact a professional maintenance personnel for repair.

If the submersible pump is installed too high, it will have an adverse effect on its water absorption performance, operating efficiency, noise, wear and other aspects. Therefore, when installing a submersible pump, its installation height should be fully considered, and corresponding measures should be taken to ensure its normal operation.

For the problem of insufficient flow of stainless steel submersible pumps, it can be checked and handled from multiple aspects. Only through comprehensive measures and multi-pronged approach can the problem of insufficient flow be effectively solved and the normal operation of the submersible pump be ensured.

For the problem of abnormal vibration and instability in the operation of stainless steel submersible pumps, it is necessary to check and deal with it from multiple aspects. Only through comprehensive measures and multi-pronged approach can this problem be effectively solved and the normal operation of the submersible pump be ensured.

The problem of low insulation resistance of stainless steel submersible pumps needs to be inspected and dealt with from many aspects. Through the implementation of correct measures, the problem of low insulation resistance can be effectively solved and the normal operation of the submersible pump can be ensured.

The motor reversal problem of stainless steel submersible pumps can be caused by many reasons, but it can usually be quickly resolved through careful inspection and correct treatment methods. During the treatment process, it is important to pay attention to the importance of safe operation and professional maintenance.