Introduction to WQ(D)-QG cutting type sewage submersible pump
WQ(D)-QG submersible sewage pump with cutting device adopts open impeller, which has the characteristics of strong sewage discharge capacity, large flow, high head and good cutting performance.
The cutting type sewage submersible pump can cut and discharge impurities such as long fibers, plastics, paper, belts, cloth strips, straw, ropes, etc. in sewage. It adopts the most advanced method to design the most reasonable hydraulic characteristics, so that the electric pump can run at full head and achieve the best combination of dry motor and water pump. The electric pump adopts high-quality silicon carbide fluororubber machine.
1. The installation surface height of double-end mechanical seal and skeleton oil seal shall not exceed 1/2 of the motor height, and the temperature of pumped sewage shall not exceed 40°C. This series of sewage and sewage submersible sewage pumps are mainly used to discharge domestic sewage, sewage, human feces and urine, and solid suspended matter and non-corrosive media containing short-fiber paper scraps, sawdust, starch, silt, ore particles, etc. The pumping liquid temperature does not exceed 40°C, the density is not more than 1200kg/m3, and the pH value is 5~9. The sewage pump adopts double-end mechanical seal and open impeller.
2.20 CrNiMo alloy blade and impeller are wear-resistant, non-clogging, non-entangled, small in size, compact in structure and easy to carry.
