Reasons for low water flow from the tap at the end of the water pump system
The reasons for the low water flow rate of the tap at the end of the water pump system may involve many aspects. The following are some possible reasons and corresponding solutions:
1. Water pump system problems
Insufficient water pump power
Reason: The power of the water pump directly affects the water pressure and flow it generates. If the water pump power is insufficient, the water pressure generated will be insufficient, resulting in a small water flow rate from the tap.
Solution: Check whether the power of the water pump meets the needs. If not, replace the water pump with a larger power.
Water pump failure
Reason: Damage or wear of internal parts of the water pump such as impellers and bearings will affect the pumping efficiency of the water pump and reduce the water flow rate.
Solution: Check the operating status of the water pump regularly and repair or replace damaged parts in time.
2. Water supply pipeline problems
Pipeline blockage
Reason: After long-term use, scale, silt or other impurities may accumulate in the water supply pipeline, causing pipeline blockage, thereby affecting the water flow.
Solution: Clean the pipeline regularly, such as using professional cleaning agents or cleaning appliances for cleaning. If the blockage is serious, some pipelines may need to be replaced.
Pipeline leakage
Reason: The pipe joint is not sealed tightly or there are cracks in the pipe itself, which will cause part of the water flow to be lost during the transportation process, thereby reducing the amount of water reaching the faucet.
Solution: Check whether there are leaks at the pipe joints and the pipe itself, and repair or replace damaged parts in time.
The pipe is too long or the diameter is too small
Reason: Long-distance water supply pipes will increase water flow resistance, and too small pipe diameters will also limit water flow.
Solution: If the family residence is far away from the water supply source, it may be necessary to increase the diameter of the water supply pipe to reduce water flow resistance and increase water flow.
3. Faucet and accessories problems
Faucet blockage
Reason: The filter or foamer at the water outlet of the faucet will accumulate impurities after long-term use, causing blockage and affecting water flow.
Solution: Remove the filter or foamer at the front end of the faucet for cleaning. If the problem still cannot be solved after cleaning, you may need to replace a new faucet.
Fuel valve core failure
Reason: Damage or failure of the valve core inside the faucet will cause poor water flow and affect water flow.
Solution: If the problem persists after cleaning the filter and foamer, it is recommended to contact professional maintenance personnel to check and replace the valve core.
