The structure diagram and components of the high-temperature thermal oil pump
The structure diagram and components of the high-temperature thermal oil pump show that the main parts of the pump include the pump body, pump cover, impeller, shaft sleeve, cantilever bearing housing, sealing sleeve, oil seal, bearings, bearing cover, pump shaft, and bracket. The high-temperature thermal oil pump is a single-stage single-suction cantilever foot support structure. The inlet of the LQRY thermal oil pump is axially suctioned, and the outlet is vertically upward. The high-temperature thermal oil pump does not require water for cooling, which is not achievable by ordinary water pumps.
The high-temperature thermal oil pump is suitable for pumping liquid media with high temperatures, so there are high requirements for the high-temperature resistance of bearings and sealing components. Both mechanical seals and packing seals have good heat resistance, with mechanical seals typically using hard alloy materials. The bearings of the high-temperature thermal oil pump produced by the energy-saving pump company have high mechanical strength, and all components have undergone thermal treatment, which is crucial to ensuring the stable operation of the pump.
The thermal oil pump can operate stably for a long time without leakage under hot conditions, without additional cooling systems, making it convenient to use. Especially in China, it has been widely used in heat transfer fluid heating systems and in various industries such as chemicals, rubber, pharmaceuticals, printing and dyeing, textiles, and food. The high-temperature thermal oil pump is an ideal pump product.
The pump body and pump cover of the high-temperature thermal oil pump are divided from the back of the impeller, which is commonly referred to as a back-opening structure. During maintenance, it is not necessary to disassemble the suction pipeline, pump body, discharge pipeline, motor, etc. Only by removing the intermediate connecting piece of the extended coupling can the rotor components be easily withdrawn for maintenance.
The pump housing contains the pump's working chamber, and the suspended bearing components support the rotor components of the pump. Roller bearings can withstand the axial and radial forces of the pump. In order to balance the axial force, most pumps have sealing rings both in front and behind the impeller, with balance holes on the impeller rear cover.
The high-temperature thermal oil pump is designed and optimized based on the performance parameters of the IS horizontal centrifugal pump and the structure of the vertical pump, and it complies with Chinese standards.
