Typical performance range of low viscosity gear oil pumps
The general performance range of low-viscosity gear oil pumps mainly includes the following aspects:
1. Flow range
The flow range of low-viscosity gear oil pumps is wide, depending on the model and specifications of the pump. Generally speaking, the flow rate can range from a few liters per minute to hundreds of liters per minute. For example, the flow range of KCB/2CY gear oil pumps includes multiple specifications such as 18.3L/min to 2000L/min.
2. Pressure range
The pressure range of low-viscosity gear oil pumps is also one of its important performance indicators. Generally, these oil pumps can provide a pressure range of several kilograms to tens of kilograms, depending on the design, materials and manufacturing process of the pump. Some specially designed low-viscosity gear oil pumps, such as the chemical gear pumps for low-viscosity materials designed by Zhengzhou Bart, can have a pressure difference of up to 1000 psi (about 6.89 MPa).
3. Viscosity range
As the name suggests, low-viscosity gear oil pumps are particularly suitable for conveying low-viscosity fluids. The applicable viscosity range of these oil pumps is generally between 5×10-3 m²/s (or equivalent cSt units, i.e. 5-1500cSt), but there are also some oil pumps designed for lower viscosity fluids, and their applicable viscosity range may be lower. It should be noted that different brands and models of oil pumps may have different applicable viscosity ranges.
4. Temperature range
The applicable temperature range of low-viscosity gear oil pumps is also an important aspect of their performance. Generally speaking, these oil pumps can operate in the range of room temperature to a certain high temperature, but the specific temperature range depends on the material selection and seal design of the pump. For example, KCB/2CY type gear oil pumps are usually suitable for conveying liquids with a temperature not higher than 70°C, but if high-temperature liquids (such as up to 300°C or less) need to be conveyed, high-temperature resistant materials or specially designed oil pumps are required.
5. Other performance characteristics
Durability: Low-viscosity gear oil pumps usually use high-quality materials and precision manufacturing processes to ensure their good durability and reliability.
Stability: These oil pumps can provide stable flow and pressure output during operation to meet the needs of various industrial applications.
Intelligent control: Some advanced low-viscosity gear oil pumps are also equipped with intelligent control systems that can automatically adjust operating parameters according to real-time working conditions to improve operating efficiency and reliability.
The general performance range of low-viscosity gear oil pumps includes a wide flow and pressure range, a moderate viscosity range, and a certain temperature tolerance. At the same time, these oil pumps also have durability,
