Stainless steel wastewater pump
1. The pump is of vertical structure, with the same inlet and outlet diameter located on the same centerline. It can be installed in the pipeline like a valve, with a compact and beautiful appearance, small footprint, and low building investment. If equipped with a protective cover, it can be used outdoors.
2. The impeller is directly mounted on the extended shaft of the motor, with short axial dimensions and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, ensuring smooth operation, low vibration, and low noise.
3. The shaft seal is a mechanical seal or a combination of mechanical seals. It adopts imported titanium alloy sealing ring, medium-sized high-temperature resistant mechanical seal, and wear-resistant sealing material made of hard alloy, which can effectively extend the service life of the mechanical seal.
4. It is easy to install and maintain without dismantling the pipeline system. Only by removing the pump unit base nut can all rotor components be extracted.
5. The pump can operate in series or parallel according to the flow rate and lift requirements.
6. The pump can be installed vertically or horizontally according to the requirements of the pipeline layout.
Operating Conditions for Stainless steel wastewater pump
1. The medium temperature does not exceed 60°C, and the specific gravity of the medium is 1~1.3kg/dm3, with a pH value in the range of 5~9.
2. Pump without an internal self-flow cooling system, with the motor part exposed to the liquid surface not exceeding 1/2.
3. The main parts of this pump are made of cast iron, so it cannot be used for pumping highly corrosive liquids. 1Cr18Ni9Ti stainless steel can be used for various corrosive media.
4. If users have special requirements such as temperature, medium, etc., please specify the detailed information of the transported medium when placing an order, so that our company can provide more reliable products.
Applications of Stainless steel wastewater pump
1. Discharge of heavily polluted wastewater from factories and commercial units.
2. Discharge systems in urban sewage treatment plants.
3. Sewage drainage systems in residential areas.
4. Discharge of wastewater from hospitals, hotels, and high-rise buildings.
5. Drainage stations in subways, basements, and civil defense systems.
6. Discharge of sludge in municipal engineering and construction sites.
7. Water supply device systems in water companies and factories.
8. Discharge of sewage from breeding farms or irrigation of rural biogas tanks and farmland.
9. Supporting machinery for exploration mines and water treatment equipment.
10. Applicable for water supply and drainage in hydraulic engineering projects.
Stainless steel wastewater pump parameter
