stainless steel pump

1. The pump is of vertical structure, with the same inlet and outlet diameter located on the same centerline. It can be installed in the pipeline like a valve, with a compact and beautiful appearance, small footprint, and low building investment. If equipped with a protective cover, it can be used outdoors. 2. The impeller is directly mounted on the extended shaft of the motor, with short axial dimensions and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, ensuring smooth operation, low vibration, and low noise. 3. The shaft seal is a mechanical seal or a combination of mechanical seals. It adopts imported titanium alloy sealing ring, medium-sized high-temperature resistant mechanical seal, and wear-resistant sealing material made of hard alloy, which can effectively extend the service life of the mechanical seal. 4. It is easy to install and maintain without dismantling the pipeline system. Only by removing the pump unit base nut can all rotor components be extracted. 5. The pump can operate in series or parallel according to the flow rate and lift requirements. 6. The pump can be installed vertically or horizontally according to the requirements of the pipeline layout.

Conditions Of Use 1.According to the concer of the impeller,the max immersion deph is 5m 2.Max temperature of the conveying is 60℃ 3.The PH valve of convey temperature is 304(4-10),316(4-13) 4.Kinematic viscosity of transport mudium is7x10-⁷~23x10-⁶m²/S

Vertical Centrifugal Pumps features 1. Hot and cold clean, non flammable and explosive, containing no solid particles or fibers of the liquid, . 2. The liquid temperature: -15Centigrade to +70Centigrade, +70 Centigrade to +115 Centigrade hot water., the temperature of the environment. 3. The environment temperature: +40 Centigrade, . 4. The minimum entrance pressure curve: NPSH +0.5m. 5. Head of safety margin of 0.5m.