Centrifugal pump

Steam Boiler Feed Pump is multistage single suction sectional centrifugal pump with excellent hydraulic model, it has advantages of high-efficiency, energy-saving, wide performance range, operating safely and steadily, low noise, long life and convenience for installing and repairing etc. Steam Boiler Feed Pump can deliver hot water, oil, corrosive or wearable medium by changing material of the pump or coupled.

The self-priming pump is a type of centrifugal pump that features a compact structure, convenient operation, smooth running, easy maintenance, high efficiency, long service life, and strong self-priming ability. It does not require the installation of a bottom valve in the pipeline, and before operation, only needs to ensure that a certain amount of liquid is stored inside the pump body. Different liquids can be handled by self-priming pumps with different materials.

The working principle of the self-priming pump is to fill the pump casing with water (or the pump casing itself contains water) before starting the pump. After starting, the high-speed rotation of the impeller causes the water in the impeller channels to flow towards the volute casing, creating a vacuum at the inlet, which opens the non-return valve, allowing the air in the suction pipe to enter the pump and reach the outer edge through the impeller channels.

Vertical Submersible Slurry Pump Advantages:
• Never has to be primed
• Very efficient, spend a little energy to move water into pump
• Easily handle solids
• Quiet without noisy
• Little cavitation because there is no “spike” in pressure as the water flows through the pump

Hot Cooking Oil Pump is an axial high temperature medium transfer circulation vortex pump, the transfer circulation medium is not containing particles, fibers of liquid (water, ethylene glycol, hydrocarbon solution, thermal oil, etc.). Product flow medium, all use SUS304 stainless steel material, with self-priming, low noise, high efficiency, easy installation, high temperature resistance and other characteristics.

Thermal Fluid Pump is widely used in petrochemical, oil, construction equipment, asphalt mixing station, food, pharmaceutical, rubber, textile printing and dyeing, synthetic fiber, building decoration and other industrial sectors of thermal oil circulation heating system.

The pump has low noise and vibration, stable operation, and can run continuously without trouble for a long time. With good thermal adaptability, sealed, no leakage.

Heat Conductive Hot Oil Pump is a single-stage cantilever structure divided into foot support and center support, the pump inlet is axial suction, and the outlet is vertical upward. The hot oil pump and the drive motor are mounted on the same base through the elastic coupling, and the whole unit does not need to add cooling system.

Heat conduction oil pump is mainly composed of shell, rotor, bearing, seal and other parts, using packing seal structure, additional temperature resistant oil seal, auxiliary sealing function, pump and motor with three claw type elastic coupling. The high temperature heat conduction pump changes the structure of the traditional heat pump from the design, adopts the cooling method of natural heat dissipation, reduces the volume of the pump, makes the structure simple, saves operating costs, and is strong.

Self-priming centrifugal oil pump, used for transporting petroleum products such as gasoline, diesel, kerosene, aviation fuel, etc., is an excellent cargo oil pump and suitable for the transportation of oil in land oil depots and oil tankers. It can also be used to transport seawater, fresh water, etc. After changing to use corrosion-resistant mechanical seals, it can transport chemical liquids.

End Suction Pump Body Structure: The end-suction pump is composed of a pump body, impeller, shaft, sealing device, and other components. Inside the pump body, there is a suction pipe and a discharge pipe, which are connected to the external system through these two pipes.

End Suction Pump Impeller Rotation: When the pump's electric motor is started, the impeller on the shaft also begins to rotate. The impeller, under the action of centrifugal force, causes the liquid to be drawn into the pump body and then flung into the discharge pipe.

Self Priming Trash Pump is designed for the treatment of municipal and industrial sewage, as well as for stage treatment and concentrated treatment systems for various sewage applications. It has earned the title of the "King of Self-Priming Sewage Pump" and is recognized as the most ideal new-generation sewage product on the market.