Centrifugal pump

666

Single-stage single-suction centrifugal pump, suitable for industrial and urban water supply, drainage, and can also be used for agricultural irrigation and drainage. It is used for transporting clean water or other liquids with physical and chemical properties similar to clean water, with a temperature not exceeding 80°C.

The double-suction center-split pump is horizontally installed, with the suction and discharge ports located below the pump shaft centerline. The pump body is horizontally split, allowing for easy maintenance without the need to dismantle the inlet and outlet pipelines. The shaft seal is a soft packing seal; it can also be changed to a mechanical seal.

The double-suction center-split pump is suitable for industrial and urban water supply and drainage, and can be used as a pump for draining or supplying water in factories, cities, power plants, water conservancy projects, etc. It can also be used for agricultural irrigation. The "S" series pumps are high-efficiency and energy-saving products, characterized by simple structure and excellent performance. They are suitable for transporting clear water or other liquids with physical and chemical properties similar to water and free from solid particles, with a medium temperature ranging from 0°C to 80°C, and an allowable inlet pressure of 0.6MPa.

The over-current parts of the pump body, impeller, pump cover, etc. in contact with the medium are lined with A3 steel and F46 shaft seals are used for advanced bellows mechanical seals. Actual use has shown that the pump has the advantages of corrosion resistance, non-aging, high mechanical strength, stable operation, advanced and reasonable structure, reliable sealing performance, convenient disassembly and maintenance, and long service life. It is widely used in industries such as chemical, pharmaceutical, petroleum, metallurgy, pickling, power, electroplating, dyeing, pesticides, etc., and can continuously transport sulfuric acid, hydrochloric acid, acetic acid, hydrofluoric acid, nitric acid, strong alkali, strong oxidant, organic flux, and reducing agent with any concentration under the temperature conditions of -20℃ to +100℃. It is a new energy-saving product that replaces the FSB fluorine pump and IH chemical centrifugal pump, and has good versatility and interchangeability with the IH chemical centrifugal pump.

Propane Transfer Centrifugal Pump For Slurry is a positive displacement vane pump, which operates through the sliding of the vanes in the centrifugal motion. The flow rate is related to the rotational speed of the axis. The inner surface of the stator is made of a composite curve. The stator, rotor, baffle, and vanes form ten sealed chambers. Due to the complex curve of the stator surface, when the rotor rotates, the volume of the inlet chamber gradually increases, creating a negative pressure to generate suction and draw in the oil. After the rotor rotates a certain angle, the volume gradually decreases, thereby pressurizing and expelling the oil. A seal block separates the suction chamber from the pressure chamber. The vanes are tightly fitted to the inner surface of the stator through centrifugal force and baffle structure, allowing the pump to operate normally under rated conditions.

Feature of High Temperature Centrifugal Pump:
It is widely used in chemical, acid, alkali, smelting, rare earth, pesticide, dye,medicine, paper, electroplating, electrolysis, acid cleaning, radio, chemical foil,scientific research institutions, national defense industry and other industries toransport acidic, alkaline, oil, rare and precious liquid toxic liquid and volatilechemical media of any concentration. Especially for the transportation of leaky,fammable and explosive liquids.
• water treatment
• Building water supply
• Chemical and petrochemical industries
• The pharmaceutical industry
• Food and Beverage Industry
• Cooling system
• mining